Nortel Networks 8005DC - Manual (Page 142)

142 Appendix B Installing the Metro Ethernet enhanced CPU daughter card
conf slot state en
9 You are done with installing the jumper on the ESM 8668 module.
Repeat this procedure for all ESM 8668 boards in your chassis.
To determine if a jumper is properly installed on an ESM 8668,
perform a visual inspection or contact a customer service
representative.
—End—
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.