Nortel Networks 8005DC - Manual (Page 136)

136 Appendix B Installing the Metro Ethernet enhanced CPU daughter card
CAUTION
Electrostatic discharge can damage hardware.
The 8692 Series CPU modules are sensitive to static electricity. Be
aware that electrostatic discharge from your clothing or other fixtures
around you, even at levels that do not create a spark, can cause damage
to the module components.
To prevent static discharge:
— Always place each module on a grounded antistatic mat until you
are ready to perform the upgrade or leave the module in the sealed
ESD bag.
— Always wear a static discharge leash or an antistatic wrist strap to
free yourself of electrostatic charges before you touch a module.
Procedure steps
Step Action
1 If you have one or more Metro ESM 8668 installed, you need to
install a jumper on each Metro ESM 8668 before installing the
SuperMezz. Follow the procedure
"Installing the jumper on an ESM
8668" (page 139) before continuing with the next step.
2 Locate the CPU daughter card installation kit and remove the CPU
daughter card and installation hardware (see
"CPU daughter card
installation kit" (page 137) ).
Be sure your shipment includes all of the items shown in "CPU
daughter card installation kit" (page 137) .
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.