Network Technologies CAT5 - Manual (Page 40)

35
Select Auto-login User
From the User Station Configuration menu, press <
A > to bring up the Auto-login User list. (From Command Mode type < A > - < R >
- < A >.)
Figure 35- Select user for Auto-logIn
To select a user to be automatically logged-in when the User Station is powered-up, choose one of the actions listed below:
Function Description Keystroke
---- Select the user indicated by the selection bar (user2 is selected as
the auto-login user in the image above) Enter or Space
None Disable auto-login. A login prompt will be shown at power up
instead of Command Mode. N
Help Display topic specific help page F1
---- Return to User Station Configuration Menu Esc
Caution: Selecting a user with administrative privileges will leave system configuration completely open.