System configuration menu – Network Technologies CAT5 User Manual
Page 32
27
System Configuration Menu
Press <
A
> -<
S
> from the Command Mode menu to display the System Configuration menu.
Figure 25- System Configuration menu
Function
Description
Keystroke
Logoff Timeout
Open an edit field to set the time in minutes after which a user will
be logged out of Command Mode due to inactivity.
Range= 0-255 minutes (value of 0 disables the feature)
L – (000-
255)
Alternate OSD Key
Define an alternative key to use with <Ctrl> to enter Command
Mode
A
OSD Blank Timeout
Set the time in minutes for the OSD screen to blank out due to
inactivity- moving the mouse or pressing a key on the keyboard will
redisplay the OSD
Range= 0-255 minutes (value of 0 disables the feature)
I
Configure DDC
Opens a Host Adapters list in which DDC can be sent from the
monitor to specific host adapters
D
Delete All Hosts
Deletes all Host Adapters listed-
requires confirmation
H
Delete All Users
Deletes all configured Users-
requires confirmation
U
Sharing Timeout
*
shown only in Matrix Mode*(page 34)- when a host is in full share
mode (page 29) , this is the time after which a user will relinquish
control so that another user may take control.
Range= 2-255 seconds
Help
Display topic specific help page
F1