Network Technologies CAT5 - Manual (Page 28)

23
Select Hosts to Scan
From the Settings Menu, press <
S > for the list of Host Adapters to select for scanning. (From Command Mode press < T > - < S >)
Figure 21- Host Adapters to Scan list
Scan Mode enables the user to scan through selected ports and to have full device control of the connected port. From this menu
the user can select the ports that will be scanned.
Only the selected ports will be scanned in Scan Mode (page 20) when the respective user is logged in. Each user can have a
separate scan list.
A check list with all the Host Adapter index numbers and names followed by a check-box will be displayed in the window.
•
unchecked box = the corresponding Host Adapter is not in the scan list
•
checked box = the corresponding Host Adapter is in the scan list
The user can toggle the state of the selected check box by pressing < Spacebar > or clicking the Host Adapter with the mouse.
Function Description Keystroke
All Select all Host Adapters A
None Clear all selected Host Adapters N
Find Locate a Host Adapter by name F
Display a Help Page for Hosts to Scan F1
Exit Return to the Settings Menu Esc
The scan selection list is automatically saved.