Nortel Networks NN44200-300 - Manual (Page 56)

56 Chapter 5 Installing the server and connecting the peripheral devices
—End—
To start the server
Step Action
1 Press the server power switch to start the server.
2 Observe the Power-On Self Test (POST) and initialization messages
on the monitor.
3 Let the mini-setup sequence run until you are prompted to login
to the operating system.
Note: The system may perform multiple reboots. This is normal.
4 Ensure that the operating system logon window appears on the
monitor.
Note: If the logon window does not appear, refer to the 1002rp
Server Maintenance and Diagnostics (NN44200-701) guide for
troubleshooting instructions.
—End—
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.