Nortel Networks NN44200-300 - Manual (Page 18)

18 Chapter 2 1002rp server description
Slot
number CallPilot-assigned
board label
a
Meridian 1*/
Communication
Server*
1000
T1/SMDI
Slot 13 (PCI Slot 5) BRD13 MPB16-4 #2
(optional) D/480JCT-2T1
Slot 14 (PCI Slot 6) BRD14 MPB16-4 #2
(optional) or MPB96
#2 (optional) MPB96 board #2
(optional)
Slot 15 (PCI Slot 7) BRD15 MPB16-4 #2
(optional) D/480JCT-2T1
(optional)
Slot 16 (PCI Slot 8) BRD16 MPB16-4 #2
(optional) D/480JCT-2T1
(optional)
Slot 17 (PCI Slot 9) BRD17 MPB16-4 #2
(optional) or MPB96
#3 (optional) MPB96 #3 (optional)
Slot 18 (PCI Slot
10) BRD18 MPB16-4 #2
(optional) Not used
Slot 19 (PCI Slot
11) BRD19 Not used Not used
Slot 20 (PCI Slot
12) BRD20 Not used Not used
a. On some CallPilot Manager screens, the CallPilot-assigned board label is displayed. This label
corresponds to the slot number. For example, BRD12 refers to the board in slot 12.
b. The SBC card includes two onboard NICs (for connection to the ELAN subnet, and the Nortel
server subnet) and an onboard video card. The NIC and monitor connectors are on the SBC
faceplate.
Network connectivity
Introduction
This section describes how the 1002rp server can be integrated into your
network. The integration depends on the type of switch you are using.
ATTENTION
To secure the CallPilot server from unauthorized access, ensure that the CallPilot
network is inside your organization’s firewall.
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.