Nortel Networks NN44200-300 - Manual (Page 23)

23
Chapter 3
Preparing for installation
In this chapter
"Installation overview" (page 23)
"Unpacking the 1002rp server" (page 26)
"Removing the front bezel and server cover" (page 27)
"Inspecting the server interior" (page 29)
Installation overview
Introduction
This section provides an overview of the steps required to install the 1002rp
server and peripheral devices.
Installation checklist
The following checklist identifies the tasks that must be performed when
installing the CallPilot server. For detailed instructions, see
"Installing the
server" (page 43) When you are finished with the installation, continue with
the Installation and Configuration Task List (NN44200-306).
Step Description Check
1 Ensure that you have reviewed the "Installing the CallPilot server" section in
the Installation and Configuration Task List (NN44200-306), and completed
stage 1 of the "Installation checklist."
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.