Nortel Networks NN44200-300 User Manual

Page 17

Slot assignments

Slot definition and slot numbering

In these tables, the term slot refers to the available slot openings in the
chassis, not the PCI or ISA connectors inside the server.

Look at the server from the rear (see

"Rear panel diagram" (page 13)

). The

slots are numbered from right to left, 1 to 20. Now, look at the server from
the front. The slots are numbered from left to right.

Note: For Meridian 1 and Communication Server 1000, the first
MPB16-4 board must be installed in slot 11. You can install up to a
maximum of two MPB16-4 boards.

1002rp slot assignments

Slot
number

CallPilot-assigned
board label

Meridian 1*/
Communication
Server*
1000

T1/SMDI

Slot 1

BRD01

Not used

Slot 2

BRD02

Not used

Slot 3

BRD03

Not used

Slot 4

BRD04

Not used

Slot 5

BRD05

Not used

Slot 6

BRD06

Not used

Slot 7

BRD07

Reserved for COM2
I/O bracket

Slot 8

BRD08

Single board
computer

Slot 9 (PCI Slot 1)

BRD09

Reserved for COM1
and parallel port I/O
bracket

Slot 10 (PCI Slot 2)

BRD10

PCI RAID controller

Slot 11 (PCI Slot 3)

BRD11

MPB16-4 #1 or
MPB96 #1

MPB96 board #1

Slot 12 (PCI Slot 4)

BRD12

MPB16-4 #2
(optional)

D/480JCT-2T1

a. On some CallPilot Manager screens, the CallPilot-assigned board label is displayed. This label
corresponds to the slot number. For example, BRD12 refers to the board in slot 12.

b. The SBC card includes two onboard NICs (for connection to the ELAN subnet, and the Nortel
server subnet) and an onboard video card. The NIC and monitor connectors are on the SBC
faceplate.

Nortel CallPilot

1002rp Server Hardware Installation

NN44200-300

01.01

Standard

5.0

23 February 2007

Nortel Networks Confidential