Nortel Networks NN44200-300 - Manual (Page 35)

Installing the second power supply module (AC or DC) 35
To install the power supply module
DANGER
High current inside the chassis can cause severe injury.
The server is shipped with one power supply module installed in the bottom
power supply bay. You must install the second power supply module, as
described here:
Step Action
1 Align the power supply module with the top power supply bay.
2 Slide the power supply module into the bay until the module is
secured by its connector.
Use some force, if necessary.
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.