Paradyne 4929 DSLAM - Manual (Page 77)

6. Command Line Interface
4929-A2-GN20-00 March 2005 6-3
ENABLE_WEB_SERVER Enables access to the DSLAM using the web server.
HELP Lists available commands and their syntax.
LOGOUT Ends the CLI session.
SET Sets a configuration option. Most SET commands require
that slot be specified, and allow port optionally to be
specified. Exceptions are the two system SET commands
for session timeout and system name.
Syntax:
set cli_session_timeout seconds
set system_name name
set slot 1 [[port] [all, port_number]] [item] [value]
Items and values for SET commands are shown in
Table 6-2, Set and Show Command Items and Values .
SHOW Shows a configuration option. SHOW commands require
that slot be specified, and allow port optionally to be
specified.
Syntax:
show slot 1 [[port] [all, port_number]] [item] [value]
Items and values for SHOW commands are shown in
Table 6-2, Set and Show Command Items and Values .
WHO Shows who is logged in the system.
Table 6-2. Set and Show Command Items and Values (1 of 3)
Items Values
ADSL_ENCAPSULATION [RFC1483-LLC,RFC1483-VCMUX]
ADSL_PORT_MODE [ON,OFF,ADAPTIVE,FIXED_ADAPTIVE]
ADSL_SPEED [XXXX YYYY]
Where:
XXXX = downstream rate (in kbps) and
YYYY = upstream rate (in kbps)
ADSL_STANDARD [MULTIMODE,G.DMT,G.LITE,T1.413,ALCATEL]
ADSL_VCI [0–65535]
ADSL_VPI [0–255]
ADSL_VPI_VCI_DETECT [ON,OFF]
BACKBONE_VLAN [0–4085]
Table 6-1. CLI Commands (2 of 2)
Command Description