Paradyne 4929 DSLAM - Manual (Page 38)

5. Configuration Using the NMS
5-4 March 2005 4929-A2-GN20-00
Management Configuration
Use the Management Configuration screen to set the unit’s IP address and other
management parameters.
Procedure
To configure management parameters:
1. From the home screen, click on the Management Config button. The
Management Configuration screen appears.
2. Select or enter the following parameters:
3. Click on Submit.
Parameter Description
IP Address Specify the management IP address for the DSLAM.
Subnet Mask Specify the subnet mask for the IP address.
Gateway Specify the first-hop gateway address.
Inband MGMT Check this box if you will use inband management
through MIM ports or ADSL ports.
VLAN Id Specify a VLAN identifier for inband management.
Priority Specify a priority (0–7) for management traffic.