Paradyne 4929 DSLAM - Manual (Page 42)

5. Configuration Using the NMS
5-8 March 2005 4929-A2-GN20-00
SNMP Community Administration
Use the SNMP Community Administration screen to set the read and read/write
community names.
Procedure
To configure community names:
1. From the home screen, click on the SNMP Community button. The SNMP
Community Administration screen appears.
2. Select or enter the following parameters:
3. Click on Submit.
Global Set
Use the Global Set screen to set parameters for all ports or for a group of ports at
once.
Parameter Description
Old Community Specify the current community name for Read or
Read/Write operations. The default for both is
Password.
New Community Specify the new community name for Read or
Read/Write operations.
Confirm New Type the new community name again.