Paradyne 4929 DSLAM - Manual (Page 73)

5. Configuration Using the NMS
4929-A2-GN20-00 March 2005 5-39
DSLAM Interconnect Configuration
Use the DSLAM Interconnect Configuration screen to specify a port connected to
a downstream 4900 Series DSLAM. This information is used to configure internal
traffic flows. The screen is accessed using the blue button above the Ethernet
uplinks on the schematic representation of the faceplate on the home page.
Procedure
To specify the port connected to a downstream DSLAM:
1. From the home screen, click on blue button above the 10/100/1000 and SFP
connectors. The DSLAM Interconnect Configuration screen appears.
2. Select Off or a port from the drop-down list. For example, if this DSLAM is
connected to a downstream DSLAM over the first MIM port, select MIMp1.
3. Click on Submit.
Downlink
Button