Paradyne 4929 DSLAM - Manual (Page 61)

5. Configuration Using the NMS
4929-A2-GN20-00 March 2005 5-27
MAC Rules
Procedure
To configure MAC rules:
1. Click on the MAC Rules tab. The MAC Rules screen appears.
2. Select or enter the following parameters:
Parameter Description
Port Select a port from the drop-down list.
Reset the MAC rules to
default parameters Click in this box to reset MAC rules when the Submit
button is clicked on.
Activate Specify whether the rule is active.
MAC Range Specify the range of MAC addresses that constitutes a
match for this rule.
Allow Tag/Untag on Ingress
Pkt. Specify tag or untag. Tag indicates that ingress
packets already matched to the MAC Rule must have
a VLAN tag to be further considered; packets without
a VLAN tag will be dropped. Untag indicates that
ingress packets already matched to the MAC Rule
cannot have a VLAN tag to be further considered;
packets with a VLAN tag will be dropped.