Paradyne 4929 DSLAM - Manual (Page 39)

5. Configuration Using the NMS
4929-A2-GN20-00 March 2005 5-5
Advanced Configuration
Use the Advanced Configuration screen to set the unit’s system name and other
parameters.
Procedure
To configure advanced system parameters:
1. From the home screen, click on the Advanced Config button. The Advanced
Configuration screen appears.
2. Select or enter the following parameters:
3. Click on Submit.
Parameter Description
System Name Specify a name to identify the DSLAM.
System Location Specify location information to further identify the
DSLAM.
IP Range Specify a range of IP addresses from which
management traffic is accepted. If your PC’s IP
address is outside the range, contact with the DSLAM
will be lost when you click on Submit.
Communication Tools Click in the On or Off buttons to enable or disable
TFTP and Telnet on this DSLAM.