Paradyne 4929 DSLAM - Manual (Page 16)

2. Installation
2-2 March 2005 4929-A2-GN20-00
Table 2-1. Cable Descriptions
Connector Name
or MIM
Connector and Cable For Connecting . . .
ADSL2+
POTS
50-pin RJ21X Telco-type
straight connector and 50-wire
cable. Up to two cables
required: one for DSL and one
for POTS (if POTS splitters are
installed). Up to 24 DSL ports to a Main
Distribution Frame, punchdown
block, or splitters.
Up to 24 POTS splitter ports to
Main Distribution Frame or
punchdown block.
SFP GigE SFP transceiver and
cable. A 4900 Series DSLAM to an
upstream 4900 or network.
10/100/1000 8-position modular plug and
8-wire Category 5 or better
unshielded twisted pair (UTP)
cable.
MIM10/100 8-position modular plug and
8-wire Category 5 or better
unshielded twisted pair (UTP)
cable.
MIM-100FX 100 Mbps SFP transceiver and
fiber optic cable.
MIM-2000F Up to two GigE SFP
transceivers and cables.
MIM-2E1
MIM-2T1 8-position modular plug and
8-wire Category 5 or better
unshielded twisted pair (UTP)
cable. Up to two required.
COM DB9 to RJ45 adapter cable. The 4900 Series DSLAM to a
terminal or a PC with a terminal
emulation program.