Paradyne 4929 DSLAM - Manual (Page 30)

3. Cabling
3-6 March 2005 4929-A2-GN20-00
Connecting the COM Port
You can use the COM port to directly connect a PC, terminal, or modem,
permitting use of the Command Line Interface (CLI).
Connecting a Terminal or PC to the COM Port
To connect a terminal or PC to the COM port:
Procedure
1. Configure the terminal or terminal emulation program to use the following
parameters:
— Maximum speed: 9600 bps
— Data bits: 8
— Parity: None
— Flow Control: None
— Stop bits: 1
2. Determine and procure the proper Data Terminal Equipment (DTE) cable type.
The COM port requires an RJ45-type plug connector. The other connector
depends on the serial port on your terminal or PC. See
DB9 to RJ45 Adapter
Pinouts in Appendix A, Connectors and Pin Assignments .
3. Connect the modular plug of your cable to the COM port socket.
4. Connect the other end of the cable to the serial port of your terminal or PC.
05-17620
POTS
ADSL2+
COM
Lnk
Act
Dup
10/10/1000
SFP
4929