Paradyne 4929 DSLAM - Manual (Page 53)

5. Configuration Using the NMS
4929-A2-GN20-00 March 2005 5-19
Global Advanced Configuration
Procedure
To configure SNR settings:
1. Click on the Global Advanced Config tab. The Global Configuration SNR
settings screen appears.
2. In the Add Ports drop-down list, select All or a group of ports. To select
multiple ports, hold the Ctrl key while clicking on your selections.
3. Select or enter the following parameters:
Parameter Description
SNR (dB) Setting Specify the upstream and downstream Signal to Noise
Ratio settings for the selected ports.
Reed Solomon Error
Correction Settings: Delay Specify the upstream and downstream Reed-Solomon
delay.
Reed Solomon Error
Correction Settings:
Correction Specify the upstream and downstream Reed-Solomon
correction.
EC/FDM Specify the upstream and downstream Echo
Cancellation or Frequency Division Multiplexing mode.
Fast Buffer Setting Specify the buffer setting: Fast or Interleave.