Paradyne 4929 DSLAM - Manual (Page 43)

5. Configuration Using the NMS
4929-A2-GN20-00 March 2005 5-9
Global Circuit Configuration
Procedure
To configure global parameters:
1. From the home screen, click on the Global Set button. The Global Circuit
Configuration screen appears.
2. In the Add Ports drop-down list, select All or a group of ports. To select
multiple ports, hold the Ctrl key while clicking on your selections.
3. Select or enter the following parameters:
Parameter Description
Reset Port Statistics Click in this box to reset statistics when the Submit
button is clicked on.
Port Mode Setting Specify a port mode:
„ Fixed – The upstream and downstream rates are
fixed.
„ Adaptive – The ports will automatically train up to
the best possible speed supported by the DSLAM,
the modem at the remote end, and the copper
cable pair connecting the two.
„ Fixed Adaptive – The ports will automatically train
up to the best possible speed, subject to a
user-specified maximum upstream and
downstream bandwidth.