Paradyne 4929 DSLAM - Manual (Page 55)

5. Configuration Using the NMS
4929-A2-GN20-00 March 2005 5-21
Circuit Configuration
Use the Circuit Configuration screen to set the parameters for a single port.
Procedure
To configure circuit parameters:
1. From the home screen, click on one of the 24 DSL port LEDs. Alternatively,
click on the Circuit Summary button, then click on a port number on the left
side of the Circuit Summary listing. The Circuit Configuration screen appears.
2. Select or enter the following parameters:
Parameter Description
Port Select a port from the drop-down list.
Port Mode Setting Specify a port mode:
„ Fixed – The upstream and downstream rates are
fixed.
„ Adaptive – The ports will automatically train up to
the best possible speed supported by the DSLAM,
the modem at the remote end, and the copper
cable pair connecting the two.
„ Fixed Adaptive – The ports will automatically train
up to the best possible speed, subject to a
user-specified maximum upstream and
downstream bandwidth.