Polycom DOC2238A - Manual (Page 98)

Chapter 4 - Hardware Description
4-18
The different types of Functional Modules are used to produce a variety of
configurations. In the MGC+50 up to eight individual Functional Modules
can be used to build the desired configuration. In the MGC+100, 16 modules
can be used.
Figure 4-10 shows the general design of the Functional Modules. The
components that are common to all Functional Modules are shown in detail in
the figure and are described in Table 4-6 on page 4-19.
Video+8 Performs video processing
and Transcoding. Up to 8 participants
MUX+10 Multiplexes and
demultiplexes audio, data,
video, and control
information; performs
channel aggregation,
enables Encryption. 18 channels at
128Kbps
MUX+20 Multiplexes and
demultiplexes audio, data,
video, and control
information; performs
channel aggregation,
enables Encryption. 128 36 channels at
128Kbps
MUX+40 Multiplexes and
demultiplexes audio, data,
video, and control
information; performs
channel aggregation,
enables Encryption. 72 channels at
128Kbps
Data Module (T-120) Performs data routing and
conference control. • T.120-12 standard
card - 12 ports
• T.120-24 card - 24
ports
Table 4-5: MGC+ Functional Modules Description
Functional Module Function Port capacity