Power module in the mgc+50, Power supply cord, Circuit breaker (ac power) – Polycom DOC2238A User Manual
Page 94: Power module in the mgc+50 -14, Power supply cord -14, Circuit breaker (ac power) -14
Chapter 4 - Hardware Description
4-14
Power Module in the MGC+50
In the MGC+50, the Power Supply Module is not hot swappable. The power
supply automatically senses the AC input voltage.
The capacities of the power supply module are shown in Table 4-3,
“MGC+50 Power supply module capacity”.
Power Supply Cord
The MGC+100 and the MGC+50 use only power supply cords supplied by
Polycom Inc.or equivalent UL approved cable, rated at a current of up to 15
A, depending on country standards, for its AC power supply. The following
specifications are for both the MGC+100 and MGC+50.
Circuit Breaker (AC Power)
Currently, MGC+100 and MGC+50 Control Units come equipped with a
circuit breaker
.
Table 4-3: MGC+50 Power supply module capacity
Voltage (V)
Maximum current (Amp.)
5
120
12
13
-12
.5
Table 4-4: MGC+ Circuit Breaker Specifications
MGC+ 50
MGC+100
AC Voltage - 10Amp at 100
VAC, 5 Amp at 240 VAC
protected by a 15 Amp circuit
breaker.
AC Voltage - 15 Amp at 100 VAC
and 7.5 Amp at 240 VAC
protected by a 15 Amp circuit
breaker.