Connecting the mgc+50 to the h.323 network, Connecting the mgc+50 to the h.323 network -36 – Polycom DOC2238A User Manual
Page 56
Chapter 2 - Hardware Installation
2-36
Connecting the MGC+50 to the H.323 Network
If an H.323 network Interface card is installed in the MGC+, connect the 8-
pin RJ-45 connector of the LAN network cable to the LAN-323 RJ-45 jack on
the rear panel of the MGC+.
Figure 2-16: LAN H.323 network connection
The H.323 network properties must be defined in the Network Services Wizard,
for details, see MGC+ Quick Start Guide, Chapter 3.