Polycom DOC2238A - Manual (Page 15)

MGC+ Hardware and Installation Manual
1-7
MGC+ Control Unit
A new Control unit is located in Slot A of the front panel of the MGC+.
The Control Unit has the following features:
• Support of both XPEK and pSOS Operating Systems (OS)
• XPEK or pSOS swappable Operating Systems (OS)
• MGC Manager Version 7.0x
• External IDE Compact Flash
• 40 GB Hard Drive
• USB port
• CCOM, revision version 5
• New Rear Access I/O
Power Consumption MGC+50 MGC+100
AC Maximum Power
consumption AC Voltage - 10Amp
at 100 VAC, 5 Amp at
240 VAC protected by
a 15 Amp circuit
breaker. AC Voltage - 15 Amp at
100 VAC and 7.5 Amp at
240 VAC protected by a 15
Amp circuit breaker.
Table 1-1: MGC+ Specifications