Polycom DOC2238A - Manual (Page 16)

Chapter 1 - Before You Begin
1-8
Scope of Manual
This manual describes the MGC+50 and the MGC+100 hardware and
installation procedure. It is intended for service engineers, system
administrators and system operators who need to install, configure and
maintain the MGC+ unit.
Detailed information on using the system, including starting and shutting
down the system, is provided in the MGC+ Manager User’s Guide.
This manual assumes the user has the following knowledge:
• Familiarity with Windows 2000®, Windows NT®, and Windows XP®
environment and interface
• Basic knowledge of videoconferencing concepts and terminology
The MGC+ Hardware and Installation Manual includes the following topics:
• Chapter 1 - Before You Begin
Provides a general description of the MGC+ unit, its main features and
description of the MGC+ Hardware and Installation Guide.
• Chapter 2 - Hardware Description
This chapter includes the Descriptions of the MGC+50/MGC+100 front
panel, back panel, and functional modules.
• Chapter 3 - System Architecture
Describes the system architecture and the data flow.
• Chapter 4 - Hardware Description
Describes the various components that make up the MGC+ unit.
• Chapter 5 - Maintenance
Describes the controls and LED indicators and provides maintenance
procedures.
• Appendix A - Interfaces Pin Assignment
Describes the pinout of the various MGC+ unit connectors.