Polycom DOC2238A - Manual (Page 22)

Chapter 2 - Hardware Installation
2-2
MGC+100 Hardware Installation
Inspecting the MGC+/ReadiManager IAM Package Contents
You should inspect the shipped box and note if it was damaged in any way. If
the box items show damage, you should file a damage claim with the carrier
who delivered it.
When deciding on a setup location for the MGC+, refer to the section
“System Safety” on page 2-2.
Disclaimer
Polycom is not responsible for damage sustained during shipment of this
product.
System Safety
This section includes the follow topics related to system safety:
• “General Safety Precautions” on page 2-2
• “Rack Mount Safety Precautions” on page 2-3
• “Polycom MGC+/ReadiManagerReadiManager Precautions” on page 2-
3
General Safety Precautions
Follow these rules to ensure general safety:
• Keep the area around the Polycom ReadiManager clean and free of
clutter.
• The MGC+50 weighs approximately 24 kg (53 lbs) and the MGC+100
weighs approximately 48 kg (106 lbs). When lifting the system, two
people at either end should lift slowly with their feet spread out to
distribute the weight. Always keep your back straight and lift with your
legs.