Polycom DOC2238A - Manual (Page 87)

MGC+ Hardware and Installation Manual
4-7
ReadiManager IAM
The ReadiManager IAM refers to the Polycom® MGC+ that houses the
Integrated Application Module (IAM). The ReadiManager provides the
hardware platform to run the
ReadiManager
™ software application.
The ReadiManager has an Intel-based Pentium 4 processor, Compact Flash,
Hard Disk Drive and 1 GB of Memory. The Control Unit is located in slot A
of the MGC+, and is the connected to the MCU’s backplane and rear I/O
panel.
The front LED’s indicate the status if the module is in operation and
functioning properly.
Table 4-1: ReadiManager IAM Specifications
Physical Specifications
CPU Intel Pentium IV 2.8 Ghz.
Flash Compact 1 GB.
RAM Memory 1 GB. non ECC DDR SDRAM 266 Mhz or higher.