Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 60)

Chapter 2: Basic Checkout
Resetting The 8525 G2/8530 G2 Vehicle-Mount
36 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
• Diagnostics: Attempts to connect or reconnect to an AP, and provides a
more detailed dump of data than if you used (Re)connect. The dump
includes the radio state, config settings, global settings and BSSID list
of APs. The SCU is saved to a file called _sdc_diag.txt in the Windows
directory.
2.11 Resetting The 8525 G2/8530 G2 Vehicle-Mount
Warm Reset
To execute a warm reset:
• Press and hold down the [BLUE] key and the [ENTER/ON] key simulta-
neously for a minimum of six seconds.
A warm reset closes open applications; any unsaved data are lost. Installed
programs and saved data are preserved.
Note: You do not need to reset your 8525 G2/8530 G2 after configuring the radio.
Cold Reset
There are two options when executing a cold reset: reset to BootLoader or reset
directly to Windows CE operating system.
To execute a cold reset and access the BooSt menu:
• Press and hold down the left [BLUE] key, the [ENTER] key and the
[SPACE] key simultaneously for a minimum of six seconds.
After a cold reset, the BooSt menu appears.
• If you want to load the Windows CE operating system, type 1.
• If you want a clean start, press ! (that is, [SHIFT] [1]). All data and settings
are lost. Files and data stored in flash are preserved.
Once the OS loads, any executables and cab files in the startup folders are run. The
cab files are deleted by the cab file installer unless they are marked read-only.