Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 173)

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 149
Chapter 5: Configuration
Scanner Properties Setup
5.5.13.14 Interleaved 2 of 5
Enabled
Set this parameter to on to enable Interleaved 2 of 5 or off to disable it.
Mod 10 Check
If this parameter is enabled (set to on), the Mod 10 check digit is calculated. This
calculation is the same as the Code 39 Mod 10 check digit.
ITF Check
If this parameter is enabled (set to on), the ITF-14/16 Mod10 check digit
is calculated.
Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.
Field Size/Chars
Refer to the description beginning on page 141 for details.
5.5.13.15 MSI Plessey
Enabled
Set this parameter to on to enable MSI Plessey or off to disable it.
One Check Digit
If this parameter is enabled (set to on), it is assumed that the last digit is a
check digit.
Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.
Field Size/Chars
Refer to the description beginning on page 141 for details.