Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 146)

Chapter 5: Configuration
Bluetooth Setup
122 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
5.5.9.2 The Server Tab
The Bluetooth connection is initiated from your 8525 G2/8530 G2 to the remote
device – therefore the 8525 G2/8530 G2 is called the ‘client’ and the remote is
called the ‘server’. The Servers tab displays the server profiles that can be activated
in your 8525 G2/8530 G2. There is currently one server profile available: Serial.
• Tap on the checkbox to activate the server, and it will display the
associated port name beside the server name.
Once you activate a server profile, it is recommended that the 8525 G2/8530 G2 be
rebooted before you try to bond from a server.
Note: You do not need to reboot if you are deactivating a server.
5.5.9.3 Outgoing Tab
Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth
devices (one at a time), but you have the freedom to switch on-the-fly.
The Outgoing Port checkbox allows you to create the Outgoing port. When the port is
created, the Outgoing tab lists the port name.