Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 119)

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 95
Chapter 5: Configuration
Keyboard Properties
The Remap Scancode dialog box is displayed.
• Type the scan code in hexidecimal in the field labelled Scancode:
Note: The Label: field displays the default function of the scancode you
are remapping.
Virtual Key, Function And Macro
The radio buttons along the side of the dialog box allow you to define to what the
scan code will be remapped: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be
on
or
off
when the virtual key is sent. If No Force is selected, the shift state is dependent on
whether the shift state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the
dialog box.
• Choose Virtual Key, Function or Macro.
• Choose a function from the Function list in the dialog box, and tap
on OK.
Editing A Scancode Remap
To edit a scancode:
• In the Scancode Remapping tab, tap on the remap you want to edit.
• Tap on the Edit button, and make the appropriate changes.
• Tap on OK to save your changes.