Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 186)

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
162 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Removing A Trap Destination
To remove a trap destination:
• In the Trap Destination tab, highlight the destination you want to delete.
• Tap on the Remove button.
A Delete Confirmation screen is displayed.
• To remove a destination, tap on Yes, or
If you decide not to remove the destination, tap on No.
5.5.14.4 Permitted Hosts Tab
For security reasons, the Network Administrator may want to restrict SNMP-node
access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all
the SNMP Managers which are allowed to monitor and manage this device. If no
entries are listed, the device will accept SNMP queries from any host.
Adding A Host
To add a new host:
• Tap on the Add button.
• Type a new host IP address in the text box provided, and press [ENTER].