Patton electronic Model 2604 - Manual (Page 102)

15 • System T1/E1 DACS Administrators’ Reference Guide
100 System main window
Total Times Unavailable (boxCountMsgBlkUnavailable)
The total number of times that the proper size message block was not available to hold a packet, and the CPU
task dumped the packet. The difference between
Total Time Waited and Total Times Unavailable is whether
the CPU task goes to sleep or simply dumps the packet to continue on. (see figure 35 on page 97).
Operating System Heap Memory
This portion of the System main window contains information about the memory used by the CPU and its
management tasks.
Total Size (boxHeapSize)
The size in octets of the operating system heap memory (see figure 35).
Free (boxHeapFreeSpace)
The amount of operating system heap memory in octets currently available (see figure 35).
Largest (boxHeapLargestSpace)
The largest contiguous memory block in octets in the memory heap (see figure 35).
Enclosure System
This portion of the System main window contains information about the internal temperature of the DACS.
Internal Temperature (boxTemperature)
Displays the current temperature in celsius (centigrade) (see figure 35).
Highest Temperature (boxMaxTemperature)
The highest temperature registered in celsius (centigrade) since the DACS was last re-booted (see figure 35 on
page 97).
Installation
This portion of the System main window contains information described in this following section.
Country (installCountry)
Specifies the country that the DACS is installed in so it can be configured in accordance with local laws (see
figure 35 on page 97).
Other
This portion of the System main window contains information described in the following sections.
Total DRAM Detected (boxDetectedMemory)
The total number of bytes of DRAM detected by the CPU (see figure 35 on page 97).
SystemID (sysObjectID)
This SNMP variable defines the type of the DACS being managed as defined by specification RFC1213.MIB
(see figure 35 on page 97).