Philips DIGA DMR-XS350EB - Manual (Page 17)

17
RQT9431
Tips
To select the type
Press the “Blue” button in step .
Each time you press the “Blue” button, the
type will be changed as follows.
All Channels ➔ Free TV ➔ Pay TV ➔ Radio ➔
Data ➔ Unknown ➔ All Channels ➔ …
To restore all channels
Press the “Red” button, and then press
[e, r] to select “Restore all channels”,
press [OK] in step .
To restore the channel
Press [e, r] to select the channel you
want to restore, press [OK] in step . The
check mark is displayed.
w, q to select the channel type.
You can select the channel type from the followings.
All : All channels including TV, Radio, Data, etc. will be searched.
TV
Radio
to start the Auto
Setup
Go to step when you
select “All” in step
8
.
It takes time. Please follow the
instruction on the screen.
This unit is checking signals
during displaying “Please wait”.
“Locked” appears when the
checking is finished. Both DISH
IN 1 and 2 are checking the signals when both terminals are
connected.
If “Locked” does not appears, the signal is weak, and Auto Setup
will not start. Check that the satellite dish is correctly positioned
and corrected.
to continue the
Auto Setup.
Ensure that signals to both DISH
IN 1 and 2 are locked before
starting scan.
to start the scan.
The scan starts.
Delete unwanted
channels.
To delete all channels of each
type on the screen (other than
Free TV), press the “Red”
button. And then press [
e , r ]
to select the channel type you
want to delete, press [OK].
To remove the selected channel, press [
e , r ] to select the channel
you want to remove, press [OK]. The check mark is removed.
BACK/
RETURN to confirm deletion.
–
•
•
•
–
–
–
•
–
–
–
–
RETURN
Other Satellite Auto Setup - Satellite Selection
freesat and other satellite channels
Satellite Selection
Search Mode
Continue
Astra2/Eurobird
All
Channel Type
DISH Input 1 - Signal Quality 0 10
All
DISH Input 1 - Signal Strength 0 10
DISH Input 1 - Signal Lock Locked
DISH Input 2 - Signal Quality 0 10
DISH Input 2 - Signal Strength 0 10
DISH Input 2 - Signal Lock Locked
The bar appears beside signal Quality
and Signal Strength when the signal is
input.
RETURN
Continue
Other Satellite Auto Setup
All other satellite tuning data will be erased.
RETURN
Other Satellite Auto Setup - Satellite Scan
Please wait... This may take up to 45 minutes to complete.
Satellite Scan
Free TV Channels found 0
Free Radio Channels found 0
Data Channels found 0
Pay TV Channels found 0
0 100%
RETURN
Other Satellite Auto Setup Select Channels to Remove
Name
Remove
Select
All Channels
Type Keep
BBC R5L
1/7
Radio
ETV2 Free TV
BBC 1 Wales Free TV
BBC 2 Wales Free TV
BBC 1 Scotland Free TV
BBC 2 Scotland
Multiple delete
Free TV
Channel type
Page Up
Page Down
Kept Channels:
Available Space:
Found Channels:
42
2957
42
CH
Notes
When the below screen appears after
step
.
RETURN
Set cha acte Se ect
S ect
Other satellite Auto Setup
No sate lite s gnals detected at d sh 2 nput
Please check dish nstallat on / connection before starting sea ch
otherwise record / playback function will be lim ted
This screen appears when this unit does
not detect the connection to DISH IN 2.
When you connect DISH IN 1 only press
[OK], then go to step or .
When you connect both DISH IN 1 and
2, turn this unit off and check your
connection. Then perform from step .
Auto Setup can take up to 45 minutes.
•
•