Polycom KIRK 5040 - Manual (Page 9)

9
1
To install battery press down back cover and slide it towards the bottom of the
handset.
2
Lift off back cover.
3 Insert battery with the label readable. Align the contacts of the battery with the
corresponding connectors on the battery compartment and insert in the direction of
the arrow.
Warning: Make sure that the contacts of the battery and the connectors of the battery
compartment are aligned before sliding the battery in the direction of the arrow.
4 Press back cover back in locked position (when you hear a click the back cover is in
position).
Note: The product label, including the CE logo, can be found in the battery
compartment.
1.5 Charging Battery
When charging battery for the first time, it is necessary to leave handset in charger for
14-16 hours for the battery to be fully charged.
During normal operation, it takes approximately 6 hours to charge the handset from
fully discharged to its full capacity. Turning the backlight off reduces charging time