Polycom KIRK 5040 - Manual (Page 48)

11.2 Headset
Using headset allows you to keep up your activities and use the phone at the same
time.
For more information about changing settings for headset, refer to “Scroll to On or Off
and press Change.” on page 58 .
11.3 Auto Answer
When auto answer is turned on, the handset automatically goes off hook when ringing.
If subscribed to a wireless solution, the handset automatically goes on hook when calls
are terminated.
For more information about changing settings for auto answer, refer to “Auto Answer”
on page 52 .
11.4 Battery
The battery function shows remaining battery capacity.
The indication on the display is not necessarily an exact reflection of the remaining
speech time, but only an indication of the voltage on the battery.
To check remaining battery capacity:
Press Menu
to enter main menu.
Scroll to Status and press Select .
11.5 Ringing Tone
The ring tone is followed by a number indicating the chosen tone of the ringer.
You can distinguish between an internal and external call by the ring tone. The ring
tone of an internal call is followed by three short beeps (system dependent feature).
For more information about changing ring tone, refer to “Ringing Tone” on page 49 .
11.6 Volume
Adjusts ringing volume according to the noise level of the surrounding environment.
For more information about adjusting ringing volume, refer to “Ringing Volume” on
page 49 .’
11.7 Firmware Version
Information about the firmware version provided for the system administrator.
48