1 changing settings of out of range, 10 bluetooth (only kirk 5040), 1 activate bluetooth function – Polycom KIRK 5040 User Manual
Page 54
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
Scroll to
Out of range
and press
Select
.
Scroll to
On
or
Off
and press
Change
.
12.9.1 Changing Settings of Out of Range
The handset offers two types of out of range alerts:
• Icon only
• Tone (beep) + icon
With the out of range indicator turned on:
• If handset is moving out of range, the low signal icon
will appear in display.
• If the handset gets out of range, the no signal icon
will appear in display. If tone +
icon is selected, beeps will appear with short intervals as long as the handset is out
of range.
To change the settings:
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
Scroll to
Out of range
and press
Select
.
Scroll to
Settings
and press
Change
.
Scroll to the desired alert and press
Select
.
12.10 Bluetooth (only KIRK 5040)
Bluetooth allows you to connect the handset to a compatible device with bluetooth
connectivitiy within 10 metres (32 feet). When a wireless headset is connected to the
KIRK 5040, it is possible to disconnect the headset from the handset (12.10.5) , to con-
nect the headset to the handset again (12.10.6), to remove the headset from the device
list (12.10.7), to connect automatically to the handset (12.10.8), to adjust the headset vol-
ume (12.10.9), to switch the audio between the headset and the handset (12.10.10), and
finally it is possible to redial the last number entered in the handset (12.10.11).
12.10.1 Activate Bluetooth Function
To use the bluetooth funcition, you must activate the bluetooth function.
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
54