4 selecting login automatically, 5 time & date, 1 choose time format – Polycom KIRK 5040 User Manual
Page 60
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
Scroll to
Advanced
and press
Select
.
Scroll to
Login
and press
Select
.
Scroll to
Create login
and press
Select
. The handset will start searching for a
system.
Scroll to the found system and press
Select
.
If required, enter an AC Code and press
Ok
to connect to the system.
Press
Ok
.
Note: If the handset is already subscribed to 10 systems, you will have to remove a
subscription before creating a new subscription (refer to
).
12.11.4.4 Selecting Login Automatically
When auto login is turned on, the handset automatically change to another system
when necessary. Auto login should only be used when systems are separate, with no
overlaps.
Note: To activate auto login your handset must be subscribed to at least two systems.
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
Scroll to
Advanced
and press
Select
.
Scroll to
Login
and press
Select
.
Scroll to
Auto login
and press
Select
.
If
Off
is selected, press
Change
to select
On
.
The handset automatically selects a system. The selected system is marked with an
A.
12.11.5 Time & Date
Note: When you turn off the handset, the settings of time are deleted if the subscribed
system does not resend the information to the handset.
12.11.5.1 Choose Time Format
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
Scroll to
Advanced
and press
Select
.
60