Polycom KIRK 5040 - Manual (Page 69)

69
are connected together. This precaution may be particularly important in rural areas
EMC:CAUTIONS: Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or electrician, as
appropriate.
If your telephone equipment causes harm to the telephone network, the telephone
company may ask you to disconnect the system from the line until the problem has
been corrected or they may discontinue your service temporarily. If possible, they will
notify you in advance, But if advance notice is not practical, you should be notified as
soon as possible. You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper functioning of your telephone system, If they
do and it is possible, you will be notified in advance to give you an opportunity to
maintain uninterrupted telephone service. If you experience trouble with this tele-
phone system, disconnect it from the network until the problem has been corrected or
until you are sure that the equipment is not malfunctioning.
Note: This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to local regulations. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Note: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
SAR: Device has been tested for SAR compliance for head and body worn configura-
tions. The highest reported SAR values are: head 0.049 W/kg (5020) / 0.206 W/kg
(5040) and body worn 0.075 W/kg(5020) / 0.330 W/kg (5040).
IC Note: Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
The Term “IC“: before the certification/registration number only signifies that the
Industry Canada technical specifications were met.