Panasonic LC2H - Manual (Page 27)

DISCONTINUED MODELS AND RECOMMENDED SUBSTITUTES
MHP-NM- MHP-M-
MHP-YC-
MHP-YC
MHP-N-
MHP-N
MHP-M
MHP-NS- MHP-N-
PM48A- PM4HA-
PM48
PM48
PM4HS-
PM4H-S
CHP-SD-
PM48A
PM4HSD-
PM4H-A
CHP-SD PM4H-SD
PM4HF-
PM4HS-
PMH-
PM4HS-
PMH-
MHP-YM-
MHP-YM
MHP-NM-
MHP-NM
Discontinued models Recommended substitutes Attachment Discontinued models Recommended substitutes Attachment
Attachment frame
AT7831 should be used.
The external dimension
and contact capacity are
different.
The external dimension
and contact capacity are
different.
* External dimensions,
however, differ. In
addition, the reset method
changes from voltage
input to non-voltage input.
With exposed attachment,
terminal base ATC180041
should be used.
* External dimensions and
contact capacity, however,
differ. In addition, with the
PM4H-SD:
1) (1) to (8) have no internal
connection, and
2) the input (star) changes
to 1a.
With exposed
attachment, terminal
base ATC180041 should
be used.
With exposed
attachment, terminal
base ATC180031 should
be used.
Attachment frame
AT7821 should be used.
Terminal base AT8-RFD
should be used.
Terminal base AT8-RFD
should be used.
Timers
MHP-NS
MHP-NM
MHP-N
PM4H-F
Exposed type
Square plug-in/
horizontal type Exposed type
Round plug-in/
vertical type
Exposed type
Round plug-in/
horizontal type Exposed type
Round plug-in/
vertical type
Embedded type
With attachment
frame Exposed type
Without
attachment frame
Embedded type
With attachment
frame Exposed type
Without
attachment frame
CHP-N-
Exposed type
with attachement
frame type
CHP-N-
CHP-N Exposed type
without attachment
frame type
CHP-NF-
CHP-NF Exposed type
without attachment
frame type
CHP-NF PM4HF-
CHP-NF PM4H-F Attachment frame
AT7821 should be used.
* External dimensions,
however, differ. In
addition, the reset method
changes from voltage
input to non-voltage input. Exposed type
Round plug-in/
vertical type
PM48M PM4H-M
PM48M- PM4HM-
PM48F-
PM48F
PM4HF-
PM4H-F
PM48SD
PM48SD
PM4HSD
PM4H-SD
With exposed
attachment, terminal
base ATC180031 for F8
type and F8R type
ATC180041 for F11R type.
With exposed
attachment, terminal
base ATC180031 should
be used.
With exposed
attachment, terminal
base ATC180031 for F8
type and F8R type
ATC180041 for F11R type.
PM4H-S
PMH CHP-N
PM4H-S
PMH
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]