Panasonic LC2H - Manual (Page 10)

LC2H
Product types
Note: Mounting frame and rubber gasket are not included.
PRESET COUNTER
LC2H
Counter
No. digits Counting speed Output mode Output Operating voltage Part No.
8 digits
30 Hz/5 kHz
switchable
• Maintain output/hold count
• Maintain output/over count
• One shot/over count
• One shot/recount
Transistor (1a) 24 V DC LC2HP-FEW-B-DC24V
Options
Mounting frame
Use for waterproofing (front panel surface)
ATH3803
Rubber gasket ATH3804
Features
1. Preset function equipped in half
size (24
× 48 mm
0.945
× 1.890 inch
).
2. Display has backlight for instant
recognition.
3. 8.7 mm 0.343 inch Character Height
(previously 7 mm 0.276 inch )
Easy-to read character height increased
from 7 mm to 8.7 mm
0.276 inch to 0.343
inch .
4. Plenty of Digits
5. Counting Speed Switchable
between 30 Hz and 5 kHz
6. Conforms to IP66 Protective
Construction (Front panel surface)
Weatherproofing supported by using
optional mounting frame and rubber
gasket
7. Includes reassuring lock mode and
lock switch to prevent erroneous
operation.
8. Screw terminals are constructed to
protect fingers to ensure safety.
9. Compliant with UL, c-UL and CE.
Green or (Red)
(backlight)
Red or (Green)
(backlight)
Red or (Green)
(backlight)
(Lit or Flashing)
(Lit or Flashing)
Counting up Counting
Green or Red can
be selected at setup.
Lit or Flashing can
be selected at setup.
8.7mm
.343inch
8 digits
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]