Polaroid PDC 3000 - Manual (Page 45)

Setting up 45
If the PDC-3000 camera is the only external SCSI device
being used with your computer, turn off the computer and
the camera. Then connect the SCSI cable provided to the
computer’s SCSI port (a). Connect the other end of the
system cable (b) to the camera’s SCSI connector.
10C.CDR
Use only the SCSI cable provided with the camera. Other
cables may appear similar, but could damage the camera or
your computer.
After connecting the SCSI cable, connect the camera to AC
power using the power adapter/trickle charger (c).
If the PDC-3000 is the
only SCSI device