Lanier 5813 - Manual (Page 59)

Basic Procedure
43
2
Copying onto standard size paper with the bypass tray
Note
❒ When you copy onto the reverse side of paper that has been already copied
onto,
⇒ P.49 “Copying onto the reverse side of paper”.
A
Open the bypass tray.
B
Press the [Normal], [Thick], [Extra Thick], or [OHP] key.
Note
❒ Make sure that the [Standard Size] key is selected.
❒ When you copy onto OHP transparencies, you can select whether a blank
slip sheet is inserted between OHP transparencies.
C
Press the [OK] key.
Cattleya2-2_FM.book Page 43 Thursday, December 14, 2000 8:17 PM