Lanier 5813 - Manual (Page 214)

Troubleshooting
198
6
x Clearing Misfeeds
R CAUTION:
Note
❒ When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ If paper misfeeds occur repeatedly, contact your service representative.
❒ When clearing misfeeds, make sure that all units and levers are returned to
their original position and all covers are closed.
❒ Do not touch originals in the document feeder when a paper misfeed occurs
in the machine. If you do the machine cannot determine which originals have
been copied and which have not.
Check the Misfeed Location Display
The display shows the location of misfed paper.
• The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
Cattleya2-2_FM.book Page 198 Thursday, December 14, 2000 8:17 PM