Lanier 5813 User Manual

Page 234

Changing the Machine's Settings

218

Photo Type
(Auto Text/Photo)

You can select the photo type (Press Print, Glossy Photo, or 2nd Gener-
ation) in Auto Text/Photo mode that is selected automatically just after
the machine is turned on or when modes are cleared.

Note

❒ Default: Press Print

Photo Type(Photo)

You can select the photo type (Press Print, Glossy Photo, or 2nd Gener-
ation) in Photo mode that is selected automatically just after the ma-
chine is turned on or when modes are cleared.

Note

❒ Default: Press Print

Copy Reset Timer

The machine returns to its initial condition automatically after your job
is finished. The time can be set from 10 to 990 seconds, or this function
can be turned off.

Select [On] or [Off] keys.

When you select [On], enter the time with the number keys. Then
press the [#] key.

Note

❒ Default: On (60 seconds)

Maximum Copy
Quantity

The maximum copy quantity can be set from 1 to 999.

Note

❒ Default: Off

Tone: Original on
Platen

The key tone sounds when you forgot to remove originals after copy-
ing.

Note

❒ Default: Off
❒ When the “Panel Tone” is set to Off, the beeper does not sound even

if the “Original Tone” is set to On.

Front Side Margin
Adjust.

You can adjust the front side margin direction and width that is select-
ed as a default in “Front Side Margin Adjust.” mode.

You can change this setting.

• Metric version: left/20 mm—right/20 mm in 1 mm steps.

• Inch version: left/0.8"—right/0.8" in 0.1" steps.

Note

❒ Default:

• Metric version: left/right 0mm
• Inch version: left/right 0"

Menu

Description

Cattleya2-2_FM.book Page 218 Thursday, December 14, 2000 8:17 PM