Lanier 5813 User Manual

Page 229

User Tools

213

Setting You can Change with the User Tools (System Settings)

Reference

For details about how to access the user tools,

⇒ P.211 “Accessing the User

Tools”.

System settings

Menu

Description

Function Priority

You can specify the mode to be displayed immediately after the opera-
tion switch is turned on or System Reset Timer mode is turned on.

Note

❒ Default: Copier

Panel Tone

A tone sounds when a key is pressed. This beeper can be turned on or
off.

Note

❒ Default: On

Ready / Tone

Choose whether the machine beeps when it becomes ready for a copy
run after power up.

Note

❒ Default: On
❒ When the “Panel Tone” is set to Off, the beeper does not sound even

if the “Ready/Tone” is set to On.

Auto Timer

The machine turns itself off automatically to conserve energy after your
job is finished, after the selected time. This function is called “Auto
Off”. The time can be set from 1 to 240 minutes.

Note

❒ Default: 90 minutes

Energy Saver Level

The machine enters Low Power mode automatically a certain time after
your job is finished. You can set this time between 1 and 240 times.

Note

❒ Default: 15 minutes

Control Panel Off
Timer

The machine enters Energy Saver mode automatically after your job is
finished, after the selected time. The time can be set from 10 to 990 sec-
onds (in 10 seconds steps), or off. In Energy Saver mode, the panel dis-
play turns off.

Note

❒ Default: On (60 seconds)

Cattleya2-2_FM.book Page 213 Thursday, December 14, 2000 8:17 PM