Lanier 5813 - Manual (Page 44)

Copying
28
2
D
Press the
{{{{Start}}}} key.
Note
❒ To stop the machine during a multi-copy run, press the {Clear/Stop} key.
❒ If you want to change the settings, press the [Yes] key. If you want to re-
sume the copy run, press the [Resume] key.
❒ To return the machine to the initial condition after copying, press the {Clear
Modes
} key.
Adjusting Copy Image Density
Image density affects the contrast of copies. With these functions you can control
the image density so that copies match originals. Make the selection you require,
and then place your originals and press the
{Start} key.
Auto image density
The machine automatically controls the image density.
Note
❒ Auto Image Density and Auto Color Select cannot be set together.
A
If Auto Color Select mode is selected, select another color mode to cancel it.
⇒ ⇒ ⇒ ⇒ P.30 “Selecting a Color Mode”.
B
Press the [Auto Image Density] key.
Cattleya2-2_FM.book Page 28 Thursday, December 14, 2000 8:17 PM