Lanier 5813 User Manual
Page 239
User Tools
223
7
Duplex/ADF/Sorter
Process Black
When copying in full color, 4 colors (Yellow, Magenta, Cyan, and
Black) are used by default. You can change this so that only 3 colors
(Yellow, Magenta, and Cyan) are used.
Note
❒ Default: 4 colors
Inkjet Output Mode
Setting
Specifies the type of image adjustment for Inkjet Output Mode:
• 1-emphasize yellow
• 2-emphasize red and yellow
• 3-emphasize red and blue
If you want to emphasis yellow, select 1.
If you want to emphasis red and yellow, select 2.
If you want to emphasis red and blue, select 3.
Note
❒ Default: 1
Menu
Description
Duplex Tray Auto
Clear
When making two-sided copies from one-sided originals, if the last
original is an odd page, the last copy will be automatically delivered
with the reverse side blank. You can cancel this setting.
Note
❒ Default: On
SADF Auto Reset
Timer
When you place one original at a time in the document feeder, the Auto
Feed
indicator lights for a selected time after an original is fed to show
that the document feeder is ready for another original. The time can be
set from 1 second to 99 seconds.
Note
❒ Default: 5 seconds
ADF Thin paper
Use when changing the type of originals to be fed. Select this function
to avoid damaging thin originals (40 - 52g/m
2
, 11-14 lb) place in the
document feeder.
Note
❒ Default: Off
Menu
Description
Cattleya2-2_FM.book Page 223 Thursday, December 14, 2000 8:17 PM