Lanier 5813 - Manual (Page 25)

9
Using the Touch Panel Display
Selecting Functions
On the touch panel display, you can find keys, instructions and messages. By
pressing keys on the display, you can select or deselect functions, and enter data
for the selected modes. If you make a mistake and wish to clear the current set-
tings, press the
{Clear Modes} key.
Important
❒ Do not apply a strong shock or force of about 30N (about 3kgf) or more to the
panel display. Otherwise, the display might be damaged.
1. Messages and instructions appear
here.
2. Total number of copies to make
3. COPY COUNTER
Counts number of copies made so far.
Note
❒ You can select whether the copy
counter counts up (counter up) or
counts down (counter down). If you
want to change the setting,
⇒ P.213
“System settings”.
4. Keys that have been selected.
5. Keys that have the option of be-
ing selected. Keys that do not have
the option of being selected are
fainter.
In this manual, keys on the display are indicated as follows:
Example:
• Key on the display:
• In the manual: [Auto Paper Select] key
Note
❒ Do not press the touch panel display with any hard or sharp object.
Cattleya2-2_FM.book Page 9 Thursday, December 14, 2000 8:17 PM